www.flintandwallingpumps.com/1-hp-submersible-pumps.htm
Flint and Walling 1 hp
Submersible Pumps

DEAN BENNETT SUPPLY
1-800-621-4291

1 hp 4" Complete Submersible Pumps
( Includes pump end, motor and control box )
1 hp pumps are available in 230V single phase only and are available
either 3 wire with control box or 2 wire without need for a control box,
since the 2 wire model has the controls built into the motor bottom.
Most installations use the 3 wire with control box model, since it provides a
point of protection for the motor on the surface of the well. If you get a
lightning strike, many times you can just change the control box.
If you use the 2 wire motor, the controls are built into the bottom of the pump,
requiring you to pull the submersible pump up from the well to service it.

Pump Model

Price
4F10G10     10 GPM  1 HP  ECONOMY Complete Submersible Pump
with Powder Coated Case and Cast Iron Ends

$ 512.00
4F10S10     10 GPM  1 HP  STAINLESS Steel Complete Submersible Pump
with Stainless Steel Pump Case and Ends

$ 596.00
Water pumping capacity chart for 1 hp 10 gpm submersible water well pumps.
4F19S10 19 GPM  1 HP  STAINLESS steel Complete Submersible Pump
with Stainless Steel Pump Case and Ends

$ 718.00
19 gpm 1 hp water pumping capacity chart for submersible water well pumps.
4F07S10 7 GPM  1 HP  STAINLESS Steel Complete Submersible Pump
with Stainless Steel Pump Case and Ends

$ 735.00
Water pumping capacity chart for 1 hp 7 gpm submersible water well pumps.
4F05S10 5 GPM  1 HP  STAINLESS Steel Complete Submersible Pump
with Stainless Steel Pump Case and Ends

$ 832.00
Pumping capacity chart for 5 gpm 1 hp water pump for water well use.

1 hp  4"   Franklin Submersible Motors

3 Wire

Motor Model

2 Wire

$ 283.00

1 hp 230V 3 Wire Single Phase

$ 338.00

1 hp Franklin Control Box

230 Volt
$ 52.00 1 hp Control Box for 3 wire Submersible Pump

F&W  1 hp Pump End Assemblies Only

4F10G10 PEA 10 GPM ECONOMY 1 HP Submersible Pump End Assembly
with Powder Coated Case and Cast Iron Ends

$ 307.00

4F10S10 PEA
10 GPM  1 HP STAINLESS Steel Submersible Pump End Assembly
with Stainless Steel Case and Ends


$ 402.00

4F19S10 PEA
19 GPM  1 HP STAINLESS Steel Submersible Pump End Assembly
with Stainless Steel Case and Ends


$ 375.00

4F07S10 PEA
7 GPM  1 HP STAINLESS Steel Submersible Pump End Assembly
with Stainless Steel Case and Ends


$ 419.00

4F05S10 PEA
5 GPM  1 HP STAINLESS Steel Submersible Pump End Assembly
with Stainless Steel Case and Ends


$ 507.00

Submersible pumps can be combined with wire, tanks
and anything except pipe to qualify for our
$ 1,000.00 FULL FREIGHT PREPAID ORDER POLICY

 


10 GPM   1 HP


19 GPM   1 HP
Depth
to
water		 Disch
PSI		 0
PSI		 20
PSI		 40
PSI		 60
PSI		 Depth
to
water		 Disch
PSI		 0
PSI		 20
PSI		 40
PSI		 60
PSI

40'

 GPM 15.3 14.5 13.5 40' GPM 26.6 24.0 21.2 17.9
60' 15.0 14.1 12.7 60' 25.5 22.9 19.8 16.4
80' 15.4 14.7 13.7 12.7 80' 24.4 21.7 18.4 14.5
100' 15.1 14.3 13.3 12.3 100' 23.2 20.4 16.8 12.2
120' 14.7 13.8 12.9 11.8 120' 22.1 19.0 15.2 9.6
140' 14.3 13.4 12.4 11.2 140' 20.7 17.4 12.8 3.5
160' 13.9 13.0 11.9 10.9 160' 19.4 15.6 10.4
180' 13.6 12.6 11.4 10.3 180' 17.8 13.7 5.6
200' 13.1 12.1 10.9 9.7 200' 16.2 11.4
225' 12.6 11.6 10.3 8.9 225' 13.7 6.2
250' 12.0 10.9 9.5 7.8 250' 10.7
275' 11.4 10.2 8.6 6.6 275' 5.0
300' 10.8 9.6 7.9 5.0 300'
325' 10.2 8.5 6.5
350' 9.3 7.6 4.5
400' 7.4 4.6
450' 3.8

7 GPM    1 HP

 5 GPM   1 HP
Depth
to
water		 Disch
PSI		 0
PSI		 20
PSI		 40
PSI		 60
PSI		 Depth
to
water		 Disch
PSI		 0
PSI		 20
PSI		 40
PSI		 60
PSI
40' GPM 40' GPM
60' 13.7 13.0 12.2 11.8 60'
80' 13.4 12.7 11.9 11.0 80' 9.9 9.4 9.2 8.5
100' 13.1 12.3 11.5 10.7 100' 9.7 9.2 8.7 8.3
120' 12.7 12.0 11.2 10.3 120' 9.5 9.0 8.5 8.1
140' 12.4 11.7 10.8 9.9 140' 9.3 8.8 8.3 7.9
160' 12.1 11.3 10.4 9.6 160' 9.1 8.6 8.1 7.7
180' 11.7 10.9 10.1 9.2 180' 8.9 8.4 7.9 7.5
200' 11.4 10.6 9.7 8.8 200' 8.7 8.2 7.7 7.2
225' 10.9 10.1 9.2 8.3 225' 8.4 7.9 7.5 7.0
250' 10.5 9.7 8.7 7.7 250' 8.2 7.7 7.2 6.7
275' 10.0 9.2 8.1 7.1 275' 7.9 7.4 6.9 6.4
300' 9.5 8.7 7.6 6.5 300' 7.7 7.2 6.7 6.1
325' 9.0 7.8 7.0 5.8 325' 7.4 6.9 6.3 5.8
350' 8.5 7.5 6.3 4.9 350' 7.1 6.6 6.0 5.5
400' 7.4 6.3 4.7 2.5 400' 6.5 6.0 5.4 4.7
450' 6.1 4.7 2.1 450' 5.9 5.3 4.6 3.8
500' 4.5 2.1 500' 5.3 4.6 3.7 2.7
550' 1.6 550' 4.5 3.7 2.5
600' 3.6 2.4
650' 2.3

Above prices effective March 15, 2007

Pump Index

Hit Counter

Download our catalog in pdf format