Flint and Walling 1/2 hp
Submersible Pumps

DEAN BENNETT SUPPLY
1-800-621-4291

1/2 hp 4" Complete Submersible Pumps
( Includes pump end, motor and control box )
1/2 hp pumps are available in 115V or 230V single phase and are available
either 3 wire with control box or 2 wire without need for a control box.
Most installations use the 3 wire with control box model, since it provides a
point of protection for the motor on the surface of the well. If you get a
lightning strike, many times you can just change the control box.
If you use the 2 wire motor, the controls are built into the bottom of the pump,
requiring you to pull the submersible up from the well to service it.

Pump Model

Price

4F10G05     10 GPM 1/2 HP  ECONOMY Complete Submersible Pump
with Powder Coated Case and Cast Iron Ends

230V = $ 399.00
115V = $ 408.00

4F10S05     10 GPM 1/2 HP  STAINLESS Steel Complete Submersible Pump
with Stainless Steel Pump Case and Ends

230V = $ 469.00
115V = $ 472.00

Water pumping capacity chart for the F&W 10 gpm 1/2 hp submersible water well pump.
4F07S05 7 GPM 1/2 HP  STAINLESS Steel Complete Submersible Pump
with Stainless Steel Pump Case and Ends

$ 577.00

Pumping capacity chart for 7 gpm 1/2 hp submersible water well pumps.
4F05S05 5 GPM 1/2 HP  STAINLESS Steel Complete Submersible Pump
with Stainless Steel Pump Case and Ends

$ 617.00

Submersible pump capacity chart for the 4F05S05 F&W 1/2 hp 5 gpm water well submersible pump.

1/2 hp  4" Franklin Submersible Motors

3 Wire

Motor Model

2 Wire

$ 228.00

1/2 hp 115V or 230V

$ 262.00

1/2 hp Franklin Control Box

230 Volt 115 Volt
$ 48.00 1/2 hp Control Box for 3 wire Submersible Pump $ 48.00

F&W  1/2 hp Pump End Assemblies Only

4F10G05 PEA 10 GPM ECONOMY 1/2 HP Submersible Pump End Assembly
with Powder Coated Case and Cast Iron Ends

$ 149.00


4F10S05 PEA

10 GPM 1/2 HP STAINLESS Steel Submersible Pump End Assembly with Stainless Steel Case and Ends


$ 246.00


4F07S05 PEA

7 GPM 1/2 HP STAINLESS Steel Submersible Pump End Assembly
with Stainless Steel Case and Ends


$ 294.00


4F05S05 PEA

5 GPM 1/2 HP STAINLESS Steel Submersible Pump End Assembly
with Stainless Steel Case and Ends


$ 374.00

Submersible pumps can be combined with wire, tanks
and anything except pipe to qualify for our
$ 1,000.00 FULL FREIGHT PREPAID ORDER POLICY


10 GPM 1/2 HP


7 GPM 1/2 HP

Depth
to
water
Disch
PSI
0
PSI
20
PSI
40
PSI
60
PSI
Depth
to
water
Disch
PSI
0
PSI
20
PSI
40
PSI
60
PSI

40'

GPM 15.6 14.1 12.0 9.9 40' GPM 13.6 12.2 10.7 9.1
60' 14.7 13.3 11.0 8.6 60' 13.0 11.6 10.0 8.3
80' 14.2 12.5 10.0 6.7 80' 12.4 10.9 9.3 7.5
100' 13.4 11.6 8.7 4.5 100' 11.7 10.3 8.5 6.5
120' 12.6 10.5 6.9 120' 11.0 9.6 7.7 5.3
140' 11.7 9.5 4.8 140' 10.4 8.9 6.8 4.0
160' 10.8 7.8 160' 9.8 8.1 5.7 2.3
180' 9.7 6.0 180' 9.0 7.2 4.4
200' 8.3 3.4 200' 8.2 6.1 2.8
225' 6.3 225' 7.2 4.7
250' 2.1 250' 5.8 2.6
275' 4.2
300' 2.1

5 GPM 1/2 HP

Depth
to
water
Disch
PSI
0
PSI
20
PSI
40
PSI
60
PSI
40' GPM 9.9 9.1 8.3 7.5 4 inch submersible water well pump.
60' 9.6 8.8 7.9 7.1
80' 9.2 8.4 7.5 6.7
100' 8.9 8.1 7.1 6.2
120' 8.5 7.7 6.7 5.8
140' 8.2 7.3 6.3 5.3
160' 7.8 6.9 5.9 4.8
180' 7.4 6.5 5.4 4.2
200' 7.0 6.0 4.9 3.6
225' 6.5 5.5 4.2 2.7
250' 5.9 4.8 3.5
275' 5.3 4.1 2.4
300' 4.7 3.3
325' 4.0 2.3
350' 3.2

Above prices effective March 17, 2008

Pump Index

Hit Counter

Download our catalog in pdf format